manualshive.com logo in svg

Canon PowerShot A400, Quick Start Manual

Share
Download
Canon PowerShot A400 Quick Start Manual Download Page 390

27

Correction :

Replace the ink cassette with a new one.

Correction :

Insert the ink cassette into the printer.

Correction :

Turn the printer on.

Correction :

Check the USB cable to make sure it is connected correctly.

Correction :

Insert the paper cassette into the printer.

Correction :

Replace the paper with the correct size.

Ink cassette is empty and must be replaced.
Press [Resume] to resume, or [Cancel] to stop.

Cause :

There is no more ink in the ink cassette.

Ink cassette not installed.
You must insert an ink cassette before printing.
Press [Resume] to resume, or [Cancel] to stop.

Cause :

The ink cassette is not inserted into the printer.

The printer is not ready for printing.
Check the printer power and printer connections.

Cause :

No power is supplied to the printer.

Cause :

The USB cable is not connected correctly.

No Paper Cassette has been found.
Insert an appropriate one.
Press [Resume] to resume, or [Cancel] to stop.

Cause :

The paper cassette is not inserted.

Wrong type of paper.
Replace with the right type.
Press [Resume] to resume, or [Cancel] to stop.

Cause :

The paper is not suitable for the print settings.

Summary of Contents for PowerShot A400













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands