manualshive.com logo in svg

Canon PowerShot A400, Quick Start Manual

Share
Download
Canon PowerShot A400 Quick Start Manual Download Page 375

 

12

 

3

 

Click [4 Print], check print settings such as the number of copies, 
and then click [Print]. 

 

If you stop printing while printing is in progress, paper is ejected to the 
paper handling slot and a printing error may occur. This is not a 
malfunction, but a mechanism for protecting the print head.
If you interrupt printing while it is in progress, be sure to check the 
printer status.

•

 

If the printer’s display window is blue:

 

You can continue to print.

•

 

If the printer’s display window is red:

 

Temporarily remove paper from the paper handling slot. Turn the 
printer off and then back on again. Confirm that the displayed 
window is blue before printing again.

Note that when printing is interrupted, one print’s equivalent of the ink 
cassette's ink sheet is used.

Summary of Contents for PowerShot A400













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands