manualshive.com logo in svg

Canon PowerShot A400, Quick Start Manual

Share
Download
Canon PowerShot A400 Quick Start Manual Download Page 367

 

4

 

Read This First

 

About the Manuals

 

This user guide describes how to connect the printer to a computer and print 
images.

 

Printer User Guide

 

Contains the information necessary to print from your 
computer, including printer preparation and handling 
notes, names of parts, installation of necessary software 
and the printer driver, and connection of the printer to 
your computer. Please read before using the printer.

 

This user guide

 

Describes how to print using the software provided on the 
supplied CD-ROM (Canon CP Printer Solution Disk).

Screen shots from Windows XP are used for illustration, but the procedure is the 
same with Windows 98 Second Edition (SE)/Windows Me/Windows 2000.

Detailed explanations of operating procedures are given in the [Help] 
accompanying each software application.

If a problem occurs, refer to the following:

• Trouble with the printer itself:

See the

 

 Printer User Guide

 

.

• Printing problems:

See this user guide.

Summary of Contents for PowerShot A400













































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands