Canon PowerShot A100, User Manual

Page: 21 / 120

21 20
Never mix unused and partially used batter-
ies. Always load two fresh (or fully recharged)
batteries at the same time.
Never mix batteries of different types or from
different manufactures. Both batteries should
be identical.
Before inserting the batteries, wipe the
battery terminals well with a dry cloth. Oil from
one’s skin or other dirt may cause a consid-
erable reduction in the number of recordable
images or reduced usage time.
Before using the camera, wipe the and
terminals in the camera well with a dry cloth.
Dirt may cause a bad electrical contact.
Battery performance deteriorates at low
temperatures (especially with alkaline
batteries). If you are using the camera in cold
areas and batteries are running down faster
than they should, you may be able to restore
performance by placing batteries in an inner
pocket to warm them up prior to use. But be
careful that you don’t put the batteries into a
pocket together with a metal key chain or
other metallic objects, as these objects may
cause batteries to short-circuit.
Proper Battery Handling
Use AA-size Alkaline or Canon AA-size NiMH
batteries only. Refer to "Using Rechargeable
Batteries" (p. 96) for their handling.
Never use manganese or lithium batteries,
as these battery types may overheat in the
camera.
Since the performance of alkaline batteries
may differ according to brand, the operating
time of the batteries you purchase may not
be as long as the batteries that came with
the camera.
Camera operating time may shorten at low
temperatures when alkaline batteries are
used. Also due to their specifications,
alkaline batteries may expire faster than
NiMH batteries. If you are using the camera
in cold areas or for a long time, we
recommend using Canon AA-size NiMH
Battery Kit.
While it is possible to use AA-size nickel-
cadmium batteries, performance is unreliable
and their use is not recommended.
●
Preparing the Camera
●
5
Close the CF card slot / battery cover.
When the camera's indicator flashes green, do
not turn off the power or open the battery cover.
The camera is writing, reading, erasing or trans-
mitting an image to or from the CF card. Do not
perform the following operations as recorded
images may be damaged as a result.
• Turn the camera off
• Open the cover
• Shake the camera
Be aware that use of CF cards whose contents
have been edited on another camera or with
another company’s software may cause the
camera to operate incorrectly.
We recommend that you use the optional AC
Adapter Kit ACK800 to power the camera
during long usage sessions (p. 99).
The optional battery charger kit lets you use
rechargeable NiMH batteries to power the
camera (p. 96).
For information about the Battery and
Charger Kit and AA-size rechargeable NiMH
batteries, see the System Map (separate
from this guide).
For important information, see “Battery
Performance” (p. 109) and “CF Cards and
Estimated Capacities (Recordable Images)”
(p. 110).
●
Preparing the Camera
●