Canon Power Shot SX710 HS User Manual Download Page 95

Page: 95 / 177

Before Use

Basic Guide

Advanced Guide

Index

Camera Basics

Auto Mode /

Hybrid Auto Mode

Other Shooting Modes

P Mode

Tv, Av, and M Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Rotating Images

Still Images

Movies

Change the orientation of images and save them as follows.

Choose [ ].

●

Press the [

] button, and then choose

[

] in the menu (

27).

Rotate the image.

●

Press the [ ] or [ ] button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the [

] button to complete the

setting.

Using the Menu

Choose [Rotate].

●

Press the [

] button and choose

[Rotate] on the [

] tab (

28).

Specifying All Images at Once

Choose [Select All Images].

●

Following step 2 in “Choosing a Selection
Method” (

94), choose [Select All

Images] and press the [

] button.

Erase the images.

●

Press the [ ][ ] buttons or turn the [

]

dial to choose [OK], and then press the
[

] button.

Summary of Contents for Power Shot SX710 HS


















































































































































































Search results

Summary of Contents for Power Shot SX710 HS

Reviews:

Brands by name

Popular brands

Canon Power Shot SX710 HS, User Manual

Search results

Summary of Contents for Power Shot SX710 HS

Reviews:

Brands by name

Popular brands