Canon POD Deck Lite-C1, Service Manual

Page: 139 / 154

Paper Positioning Check /
Adjustment Procedure
imageRUNNER ADVANCE
8500 Series
■ Adjusting the Left Edge Margin(L1)
of the Image
1. Print sheets of paper from the POD Deck Lite. Check
that L1 is 2.5+/-1.5mm. Execute adjustment as
follows when it is out of standard.
L1
■ Adjustment Procedure(service
mode)
1. Adjust the setting value on the following service
mode.
Service Mode > COPIER > ADJUST > FEED-ADJ >
ADJ-DK
(LV1)
NOTE:
Setting range: -20 to 20 (0.1mm by 1 setting value)
L1 is increased 0.1mm by setting value 1.
+: L1 is increased (Image moves to the right).
-: L1 is decreased (Image moves to the left).
2. Exit service mode.
3. Print sheets of paper from POD Deck Lite and then
check that L1 is 2.5+/-1.5mm. Execute manual
adjustment as follows when it is out of standard.
■ Adjustment Procedure (manual)
1. Press the open button of the POD Deck Lite to open
the compartment.
2. Open the compartment until it stops while releasing
stoppers with pressing left and right latches.
6. Installation
133