manualshive.com logo in svg

Canon PIXMA MP950, Service Manual

Share
Download
Canon PIXMA MP950 Service Manual Download Page 7

1-2.  Customer Maintenance

 

*1

:

  Only for CD / DVD printing supported regions.

   

1-3.  Product Life

 

(1)  Machine

 

Specified print volume (I) or the years of use (II), whichever comes first.

 

(I)  Print volume:  14,000 pages

 

(II)  Years of use:  5 years of use 

 

(2)  Print head

 

Print volume:  14,000 pages

 

Adjustment

Timing

Purpose

Tool

Approx. 

time

Print head 
alignment

 

At print head replacement.

 

To ensure accurate dot placement. - Machine buttons

 

- Computer (automatic 

settings via the MP 

driver)

 

 

3 min.

 

Print head 

cleaning

 

When print quality is not satisfying.

 

To improve nozzle conditions.

 

- Machine buttons

 

- Computer (settings via 

the MP driver)

 

1 min.

 

Print head deep 

cleaning

 

When print quality is not satisfying, 

and not improved by print head 
cleaning.

 

To improve nozzle conditions.

 

- Machine buttons

 

- Computer (settings via 

the MP driver)

 

2 min.

 

Ink tank 
replacement

 

When an ink tank becomes empty. 
("No ink error" displayed on the 
monitor, or short flashing of an ink 
tank LED)

 

-----

 

-----

 

2 min.

 

Paper feed roller 
cleaning

  

When paper does not feed properly.

 

To clean the paper feed rollers.

 

Machine buttons

 

2 min.

 

CD / DVD print 

position 
adjustment

*1

 

At CD / DVD printing, when 
necessary.

 

To correct CD / DVD print 
position.

 

Computer (application 

software)

5 min.

 

Bottom plate 
cleaning

 

When the back side of the paper is 
smeared.

 

To clean the platen ribs.

 

- Plain paper

 

- Computer (settings via 

the MP driver)

 

1 min.

 

Scanning area 
cleaning

 

- When the platen glass is dirty.

 

- When the FAU lamp is dirty.

 

- When the FAU protective sheet is 

dirty.

  

- Clean the platen glass.

  

- Clean the FAU lamp

 

- Clean the FAU protective sheet

  

Clean and soft cloth

 

1 min.

 

ASF sub- roller 
cleaning

 

When the paper fed from the ASF is 
smeared due to ink mist attached to 
the ASF sub-rollers.

 

To clean the ASF sub-rollers.

 

- Plain paper

 

- Machine buttons (paper 

feed roller cleaning)

  

[See Part 2, 5. FAQ, 

How to make and set 

the ASF sub-roller 
cleaning sheet, for 
details]

  

1 min.

 

Black

 

1,500 character pattern

6,000 pages

 

Color A4, 7.5% duty per color pattern

3,500 pages

A4, photo, borderless printing

400 pages

 

4 x 6, photo, borderless printing

3,000 pages

 

Postcard, photo, borderless printing

1,100 pages

 

1-2

Summary of Contents for PIXMA MP950
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands