manualshive.com logo in svg

Canon PIXMA MP810, Service Manual, Page: 6 / 20

Share
Download
Canon PIXMA MP810 Service Manual Download Page 6

1.  MAINTENANCE 

1-1.  Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service 
Engineer 

(1) Adjustment 

Caution:  - DO NOT loosen the red screws at both ends of the carriage shaft, securing the print head position, as they are not re-adjustable. 
- The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit. 
- For the MP810 automatic print head alignment, use Matte Photo Paper (MP-101). If Matte Photo Paper (MP-101) is not available, perform manual print 
head alignment using plain paper. 
*  

Part 1:  MAINTENANCE

TABLE OF CONTENTS

 

Adjustment

Timing

Purpose

Tool

Approx. 

time

 

EEPROM initialization - At logic board replacement

To initialize settings

None. 
Perform in the service mode.

1 min.

 

Destination settings 
(EEPROM settings)

- At logic board replacement 

To set destination.

None. 
Perform in the service mode.

1 min.

 

Ink absorber counter 
resetting 
(EEPROM settings) 

- At logic board replacement 
- At ink absorber replacement 

To reset the ink absorber counter.

None. 
Perform in the service mode.

1 min.

 

Ink absorber counter 
value setting 
(EEPROM settings)

- At logic board replacement

To set the ink amount data in the ink 
absorber to the ink absorber counter.

None. 
Perform in the service mode.

1 min.

 

Paper feed motor 
position adjustment

- At paper feed motor replacement

To adjust the belt tension. 
(Position the paper feed motor so that 
the belt is stretched tight.)

None.

5 min.

 

 

Automatic print head 
alignment

- At print head replacement 
- At logic board replacement 
- When print quality is not satisfying

To secure the dot placement accuracy.

None.  
Perform in the user mode.

MP810: 13 
min.  
(Use MP-
101.)  
MP960: 6 
min.

 

Manual print head 
alignment

- At print head replacement 
- At logic board replacement 
- When print quality is not satisfying

To secure the dot placement accuracy.

None. 
Perform in the user mode.

MP810: 15 
min. 
MP960: 6 
min.

 

Grease application

- At carriage unit replacement 
- At lift cam replacement 
- To gears 
- At Easy-Scroll Wheel replacement

To maintain sliding properties of the 
following items: 
- Carriage shaft 
- Lift cam bushing 
- Machine sliding portions (gears) 
- Wheel base

FLOIL KG-107A

1 min.

 

Ink system function 
check

- At logic board replacement 
- At spur base replacement 
- At carriage unit replacement

To maintain detection functionality for 
presence of the ink tanks and each ink 
tank position.

None. 
Perform in the service mode.

1 min.

 

LCD language settings

- At logic board replacement

To set the language to be displayed on 
the LCD.

None. 
Perform in the user mode.

1 min.

 

Document pressure 
plate sheet position 
adjustment

- At document pressure plate sheet 
replacement 
- At document pressure plate sheet 
frame replacement 
- At scanner unit replacement

To maintain scanning accuracy, hold 
the sheet with the long side down, then 
fit its upper left corner to the platen 
glass reference mark (back left).

None.

1 min.

 

LF correction

- At logic board replacement 
- At feed roller ass'y replacement 

To correct line feeding (LF roller 
diameter).

None. 
Perform in the service mode.

5 min. 
(LF 
correction 
and Eject 
correction is 
performed at 
the same 
time.) 

New

Eject correction

- At logic board replacement 
- At platen unit replacement

To correct line feeding (eject roller 
diameter).

None. 
Perform in the service mode.

1-1

Summary of Contents for PIXMA MP810





















Reviews:

No comments