*1: Replace the print head only after the print head deep cleaning is performed 2 times, and when the problem persists.
- print head
*1
.
- Perform print head alignment.
Printing is incorrect.
Replace the logic board.
No ejection of black ink.
- Confirm that the ink tanks are installed properly.
- Perform print head maintenance.
- Replace the
- ink tank, or
- print head
*1
.
- Remove foreign material from the purge unit caps, if any.
- Replace the purge unit.
Graphic or text is enlarged on printouts.
When enlarged in the carriage movement direction:
- Clean grease or oil off the timing slit strip film.
- Replace the
- timing slit strip film,
- carriage unit, or
- logic board.
When enlarged in the paper feed direction:
- Clean grease or oil off the timing slit disk film or the timing slit disk eject
film.
- Replace the
- timing slit disk film,
- timing slit disk eject film,
- timing sensor unit,
- LF roller,
- platen unit, or
- logic board.
Faulty scanning
No scanning.
- Confirm the connection between the scanning unit and the logic board.
- Replace the
- scanning unit, or
- logic board.
Streaks or smears on the scanned image.
- Clean the platen glass.
- Confirm the connection between the scanning unit and the logic board.
- Replace the
- scanning unit,
- logic board, or
- document pressure plate sheet.
Streaks or smears on the image scanned from film,
or no scanning of film.
- Clean the platen glass.
- Confirm the connection between the scanning unit and the logic board.
- Replace the
- scanning unit,
- logic board,
- FAU and mount film adapter, or
- document pressure plate unit.
- Clean the FAU lamp.
<Part 1: 2. LIST OF ERROR DISPLAY / INDICATION>
1-10