manualshive.com logo in svg

Canon PIXMA MP800, Service Manual

Share
Download
Canon PIXMA MP800 Service Manual Download Page 35

 

 

   

4)  Open the scanning unit (printer cover) to display the color pattern. Only the ON/OFF button is enabled.

 

   

 

 

 

5)  Press the ON/OFF button to return to the service mode menu selection.

 

 

 

 

<Waste ink amount setting procedures>

 

Set the waste ink amount data to a replaced new EEPROM after the logic board is replaced in servicing.

 

1)  Before replacement of the logic board ass'y, check the waste ink amount in EEPROM information print. 

[See 3-4. 

Verification Items, (2) EEPROM information print.]

 

 

2)  In the waste ink amount setting mode, press the Stop/Reset button the specified number of time(s) according to the waste ink 

absorber whose value should be transferred to the replaced new EEPROM. (Only the main waste ink absorber for the 
MP800)

 

Time(s)

Waste ink absorber

Remarks

0 times

Main waste ink absorber

 

 

 

1 time

Platen waste ink absorber

  

Not valid for the MP800

 

Both the main and platen waste ink 

1-30

Summary of Contents for PIXMA MP800































































Reviews:

No comments

Brands by name

Popular brands

Load more brands