Canon PIXMA MP510 Service Manual Download Page 33

Page: 33 / 68

Note: - If the Stop/Reset button is pressed 14 or more times, the Alarm LED (orange) or Power LED (green) lights steadily without

any changes.

In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the
table below, and press the ON/OFF button.

Note: Confirm the model name and destination in service test print or EEPROM information print.

After replacement of the ink absorber, reset the applicable ink absorber counter.

1) Before replacement of the ink absorber, check the ink absorber counter value in EEPROM information print.

See 3-4. Verification

Items, (2) EEPROM information print.

2) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the replaced ink

absorber to set its counter to 0%, or 60% (for partial replacement).

See "

Destination settings procedures

" below.

6 times

Green (Power)

Print head deep cleaning

Cleaning of both Black and Color

7 to 9 times

Orange at odd

numbers (Alarm)

Green at even

numbers (Power)

Return to the menu selection

10 times

Green (Power)

Eject roller correction

Not used in servicing.

11 times

Orange (Alarm)

Return to the menu selection

12 times

Green (Power)

Button and LCD test

See "

Button and LCD test procedures

" below.

13 times

Orange (Alarm)

Ink absorber counter setting

See "

Ink absorber counter setting procedures

" below.

14 times or

Green (Power)

Return to the menu selection

Time(s)

LED indication

Destination

0 times

Green (Power)

No change of the destination

1 time

Orange (Alarm)

Japan

2 times

Green (Power)

Korea

3 times

Orange (Alarm)

4 times

Green (Power)

Europe

5 times

Orange (Alarm)

Australia

6 times

Green (Power)

Asia

7 times

Orange (Alarm)

China

8 times

Green (Power)

Taiwan

9 times or more

Orange (Alarm)

Return to the menu selection

Time(s)

Replaced ink absorber

Counter value

0 times

Main ink absorber

Reset to 0%

1 time

Borderless-print ink absorber

Reset to 0%

2 times

Both the main and borderless-print ink absorbers

Reset to 0%

3 times

A half portion of the main ink absorber (partial replacement)

Set to 60%

1-28

Summary of Contents for PIXMA MP510




































































Search results

Summary of Contents for PIXMA MP510

Reviews:

Related manuals for PIXMA MP510

Brands by name

Popular brands

Canon PIXMA MP510, Service Manual

Search results

Summary of Contents for PIXMA MP510

Reviews:

Related manuals for PIXMA MP510

Brands by name

Popular brands