9
Loading Paper
EN
G
L
IS
H
Loading Paper
1
Open the Paper Support, then pull out the
Paper Support Extension.
2
Open the Paper Output Tray.
3
Open the Output Tray Extension.
4
Adjust the position of the Paper Thickness
Lever.
Set it to the right when printing on envelopes or
T-shirt transfers, and left when printing on any
other type of paper. Refer to “Compatible Media
Types” in the
User’s Guide
on-screen manual.
5
Load the paper in the Rear Tray with the print
side facing UP.
Do not load higher than the Load Limit Mark (A).
6
Align the paper stack against the right side of
the Rear Tray.
7
Pinch the Paper Guide and slide it against
the left side of the paper stack.
Important
z
If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
z
Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper
to be jammed.
3
4
1
2
5
6
7
(A)
MP470_QSG_EN.book Page 9 Wednesday, May 9, 2007 10:26 AM
