Printing Maintenance
56
Print head deep cleaning starts when the POWER
POWER
POWER
POWER lamp starts blinking.
4
Print the nozzle check pattern to check the print head condition.
See “Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern
Printing the Nozzle Check Pattern” on page 44.
If a particular color is not printed properly, replace the ink tank of that color.
See “Replacing an Ink Tank
Replacing an Ink Tank
Replacing an Ink Tank
Replacing an Ink Tank” on page 37.
Note
Clicking Initial Check Items
Initial Check Items
Initial Check Items
Initial Check Items displays the items to be checked before
cleaning.
Important
Do not perform any other operation until the print head deep
cleaning finishes. This takes about one minute.
Notes
If the print head nozzles are still not clean, open the cover and
ensure that there are sufficient ink levels in all ink tanks and turn off
the printer. Be sure to perform another print head deep cleaning 24
hours after turning off the printer.
If this does not solve the problem, the print head may be worn out.
Contact the Customer Care Center.
(3)
Click OK
OK
OK
OK.
US_iP6000D_QSG.book Page 56 Thursday, June 10, 2004 2:44 PM
