Canon PIXMA GM4040 Online Manual Download

Page: 429 / 447

1000

Cause

Possible causes include the following.

• There is no paper in the rear tray.
• Paper is not loaded in the rear tray properly.

What to Do

Take the corresponding actions below.

• Load paper in the rear tray.

Loading Paper in the Rear Tray

• Align the paper guides of the rear tray with the both edges of the paper.

After carrying out the above measures, press the printer's

button to cancel the error.

Important

• Be sure to close the feed slot cover after loading paper in the rear tray. If the feed slot cover is open,

paper cannot be fed.

Note

• To cancel printing, press the printer's

Stop

button.

429

Summary of Contents for PIXMA GM4040
































































































































































































































































































































































































































































Search results

Summary of Contents for PIXMA GM4040

Reviews:

Related manuals for PIXMA GM4040

Brands by name

Popular brands

Canon PIXMA GM4040, Online Manual

Search results

Summary of Contents for PIXMA GM4040

Reviews:

Related manuals for PIXMA GM4040

Brands by name

Popular brands