3
Fold the ends of the sections circled in red along the fold lines,
and then glue at the back. Match up the pairs and then stick them
together at the back.
Fold support A along the center line and glue together on the inside.
Attach the wings to the bird.
Match up the horizontal bars of the cage door and stick them together.
* Be careful not to get front and back mixed up.
Line up the bird with the doors that have wing-shaped glue spots on
them, and then stick on the bird.
Glue the rear sides of the bird together so that they hold the support A
in place at the glue spots. * You will be putting flowers, etc., into the
bird’s beak later in the assembly, so avoid putting any glue near there
at this stage.
Pop-up Card (Birdcage) : Assembly Instructions
Canon is a registered trademark of Canon Inc.
