Attach the horizontal bars to the vertical roof bars, then join these
sections up to form an hexagonal cone, as shown in the photograph.
Glue one streamer onto the ribbon from the back, and attach the other
by fitting it into the cutaway and then gluing it from the back.
Stick the ribbon onto the roof section by gluing it at the glue spot.
* Fold the roof section to make the ribbon easier to stick on.
Stick on the vertical bars (door) matched up with the glue spots in
assembly Step 3 and join up both ends of the bars to form
a tubular shape.
Stick the horizontal bars onto to the glue spots on the vertical bars.
Stick decorative panels to bottom of vertical bars.
(Be careful to apply glue to the correct positions on the panels.)
2
Pop-up Card (Birdcage) : Assembly Instructions
Canon is a registered trademark of Canon Inc.
