Canon Optura 100 Instruction Manual Download

Page: 38 / 158

Using the Full

Range of Features

Selecting from the Menus

1. Turn the POWER switch and the TAPE/CARD switch to the

desired settings.

2. Press the MENU button to open the menu.

• One of the main menus appears, according to the settings of the

TAPE/CARD switch and the POWER switch.

3. Turn the selector dial and move the arrow to the desired submenu.
4. Press the selector dial in to select.

• The submenu appears.

5. Turn the selector dial and move the arrow to the desired function.
6. Press the selector dial in to select.

• The function and its settings only appear.

7. Turn the selector dial and move the arrow to the desired setting.

• If you are setting a function other than the white balance or shutter speed,

the function will be set if you skip to step 11.

8. Press the selector dial in to select.

• The function is set and you return to the submenu.

9. Turn the selector dial and move the arrow to

RETURN.

10.Press the selector dial in to select.

• You return to the main menu.

11. Press the MENU button.

• The main menu disappears.

Notes:

• Pressing the MENU button at any time closes the menu.
• Selecting

RETURN takes you back one menu, or closes the main menu.

• Items that are unavailable, due to the tape or card situation or the settings of

other menu items, appear in purple.

• You may often find it convenient to use the wireless controller to move around

the menus. Press its MENU button to open/close the menu and use the arrow
keys in place of turning the selector dial. Push the SET button to select.

SCREEN

SET

PUSH/SELECT

2, 11

3-10

3_OPTURA100 MC_E(36-84) 7/24/01 13:33 Page 38

Summary of Contents for Optura 100































































































































































Search results

Summary of Contents for Optura 100

Reviews:

Related manuals for Optura 100

Brands by name

Popular brands

Canon Optura 100, Instruction Manual

Search results

Summary of Contents for Optura 100

Reviews:

Related manuals for Optura 100

Brands by name

Popular brands