Canon MVX430 Instruction Manual Download

Page: 22 / 129

Step 6: Installing the Backup Battery

The backup battery (lithium button battery CR1616) allows the camcorder to retain the
date, time (

) and other camcorder settings while the power source is disconnected.

Connect a power source to the camcorder when replacing the backup battery to retain the
settings.

1. Open the memory slot/backup

battery compartment cover.

2. Pull out the backup battery holder

using a flat screwdriver or a
similar tool.

3. Insert the backup battery in the

holder with the + side facing
down.

4. Insert the battery holder and push

it in until it clicks, then close the
cover.

The backup battery has a life span of about a year. “

” flashes in red to inform

you that it needs to be replaced.

Downloaded From VideoCamera-Manual.com Manuals

Summary of Contents for MVX430


































































































































Search results

Summary of Contents for MVX430

Reviews:

Related manuals for MVX430

Brands by name

Popular brands

Canon MVX430, Instruction Manual

Search results

Summary of Contents for MVX430

Reviews:

Related manuals for MVX430

Brands by name

Popular brands