Canon MVX25i Instruction Manual Download

Page: 101 / 164

101

Using a Memory Car

Using the Flash

You can use the built-in flash for recording still images in dark places. The flash is

equipped with the red-eye reduction mode that reduces the red-eye effect that occurs

when recording people at night or in dark rooms.

Selecting the Flash Mode

Press the

(flash) button.

• The setting changes with each press of the button.

• The symbol of the selected flash mode appears on the screen.

“

” disappears after 4 seconds.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

(auto)

The flash fires automatically according to the brightness

of the subject.

(red-eye reduction, auto) The flash fires automatically according to the brightness

of the subject. With the MVX25i, the assist lamp lights up
to reduce the red-eye effect. With the MVX20i, the flash
fires a pre-flash for red-eye reduction.

(flash on)

The flash always fires.

(flash off)

The flash does not fire. Use this setting in places where

flash photography is prohibited.

PHOTO button

Flash

(flash) button

Summary of Contents for MVX25i





































































































































































Search results

Summary of Contents for MVX25i

Reviews:

Related manuals for MVX25i

Brands by name

Popular brands

Canon MVX25i, Instruction Manual

Search results

Summary of Contents for MVX25i

Reviews:

Related manuals for MVX25i

Brands by name

Popular brands