Canon MV5iMC Instruction Manual Download Page 88

Page: 88 / 181

Editing

1. Find a point on your recorded tape slightly before the section

you want to copy and set it to playback pause mode.

2. Press the REC PAUSE button on the wireless controller.

• The camcorder enters record pause mode.

3. Start playback on the other digital device while you monitor the

picture.

4. Press the pause button.

• Recording starts.

5. When you get to the point where you want to stop recording,

press the stop button or the pause button.

• Recording stops.

6. Stop playback on the other device.

Notes:

• Blanks between recordings on the playback tape are recorded as anomalous

images on the tape that is being recorded to.

• When dubbing to a Cassette with digital video equipment, be sure to set AV

DV OUT to OFF in the menu.

Dubbing

#4_MV5/MV5i/MV5i MC_E(85-105) 02.4.17 7:16 PM Page 88

Summary of Contents for MV5iMC






















































































































































































Search results

Summary of Contents for MV5iMC

Reviews:

Related manuals for MV5iMC

Brands by name

Popular brands

Canon MV5iMC, Instruction Manual

Search results

Summary of Contents for MV5iMC

Reviews:

Related manuals for MV5iMC

Brands by name

Popular brands