Canon MV MVX30i Instruction Manual Download Page 83

Page: 83 / 163

Editing

Recording from Analog Video Devices
(VCR, TV or Camcorder)

You can record videos or TV programs from a VCR or analog camcorder on the tape in

the camcorder.

1. Connect the camcorder to the analog video device.

See

Playing Back on a TV Screen

(

31).

2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.

3. Connected device: Load the recorded cassette.

4. Press the REC PAUSE button.

In record pause mode and during recording, you can check the

picture on the screen.

5. Connected device: Play back the tape.

6. Press the

button when the scene you wish to

record appears.

Recording starts.

7. Press the

button to stop recording.

• Press the

button to pause recording.

• Press the

button again to restart recording.

8. Connected device: Stop playback.

❍

Headphones cannot be used during analog line-in recording.

❍

When connecting to a TV/video with SCART terminal, use a SCART adapter
with input capability (commercially available). The supplied SCART Adapter
PC-A10 is for output only.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

REC PAUSE

DRIVE MODE

Summary of Contents for MV MVX30i




































































































































































Search results

Summary of Contents for MV MVX30i

Reviews:

Related manuals for MV MVX30i

Brands by name

Popular brands

Canon MV MVX30i, Instruction Manual

Search results

Summary of Contents for MV MVX30i

Reviews:

Related manuals for MV MVX30i

Brands by name

Popular brands