Canon MV MVX30i Instruction Manual Download Page 3

Page: 3 / 163

Intr

oduction

Using this Manual

Thank you for purchasing the Canon MVX35i/MVX30i. Please read this manual
carefully before you use the camcorder and retain it for future reference.

Change the display language before you begin (

76).

Symbols and References Used in This Manual

❍

: Precautions related to the camcorder operation.

❍

: Additional topics that complement the basic operating procedures.

❍

: Reference page number.

❍

Capital letters are used to refer to buttons on the camcorder or the wireless controller.

❍

[ ] are used to refer to menu items displayed on the screen.

❍

“Screen” refers to the LCD and the viewfinder screen.

❍

Please note that the illustrations mainly refer to the MVX35i.

The operating modes are determined by the position of the POWER switch and the

TAPE/CARD switch.

: Function can be used in this mode.

: Function cannot be used in this mode.

Trademark Acknowledgements

• Canon and Bubble Jet are registered trademarks of Canon Inc.
•

is a trademark.

•

is a trademark.

• Windows

is either a registered trademark or trademark of Microsoft Corporation in the United States

and/or other countries.

• Macintosh and Mac OS are trademarks of Apple Computer, Inc., registered in the United States and

other countries.

• Other names and products not mentioned above may be registered trademarks or trademarks of their

respective companies.

CAMERA

Operating Mode

POWER Switch

TAPE/CARD Switch

CAMERA

CAMERA

(TAPE)

PLAY (VCR)

PLAY (VCR)

(TAPE)

CARD CAMERA

CAMERA

(CARD)

CARD PLAY

PLAY (VCR)

(CARD)

Setting the Time Zone, Date and Time

Set the time zone, date and time when you first start using your camcorder, or when

you have replaced the backup battery.

Setting the Time Zone/Daylight Saving Time

1. Press the MENU button to open the menu.

2. Turn the SET dial to select [SYSTEM] and press the

SET dial.

3. Turn the SET dial to select [T.ZONE/DST] and press

the SET dial.

The time zone setting appears (see table on the next page). The default setting is Paris.

CARD PLAY

CARD CAMERA

PLAY (VCR)

CAMERA

T.ZONE/DST•••PARIS

SYSTEM

(

35)

Button and switches to be operated

Menu item and its default setting

Operating modes (see below)

Summary of Contents for MV MVX30i




































































































































































Search results

Summary of Contents for MV MVX30i

Reviews:

Related manuals for MV MVX30i

Brands by name

Popular brands

Canon MV MVX30i, Instruction Manual

Search results

Summary of Contents for MV MVX30i

Reviews:

Related manuals for MV MVX30i

Brands by name

Popular brands