Canon MultiPASS C530, Service Manual

Page: 67 / 243

1-54
MultiPASS C530/C560 Chapter 1: General Description
5.4.1 Data in the image storage memory (DRAM)
DRAM stores image data which was read other than by a direct transmission. It also acts as a buffer
memory to store the image data received. If power is turned off, the memory clear list is printed
automatically the next time the power is turned on. The user is thereby notified of the images that were
erased from memory.
Reception image data
This product is not equipped with image data backup, so that if the power supply is cut,
data in memory reception will be lost.
When image data are set to be printed, they will be stored in the DRAM as memory
reception images, and “REC'D IN MEMORY” will be displayed. This product does
not have a memory reception image transfer capability. If printing is disabled due to a
fault in the printing section, check the Memory Clear List, after turning off the power to
repair the fault, and request the other party to retransmit the message.
If the setting is for the received image data to be transferred to PC, instead of being
printed, the data will be saved as a file in the DRAM, and
“RECEIVED IN FILE”
will
be displayed. To print the contents from the main unit only, press
Memory
Reference
button then select
“FILE PRINT”
with the numeric keys. If printing is
disabled due to a fault in the printing section, connect to the PC, and start up MultiPASS
Desktop Manager. The file will be exported to the PC, and the contents can be verified
on the PC display and saved.
NOTE