Canon MultiPASS C530, Service Manual

Page: 142 / 243

2-63
MultiPASS C530/C560 Chapter 2: Technical Reference
NOTE
COMMENT (Private comment: 0x07)
An optional comment may be added.
ESC 0x07 Lc:Comment length
NEWLEN (New length: 0x04)
Redefine the document length. Only usable when VLENGTH=ON.
ESC 0x04 YD:Document length
RESERVE (Reserve: 0x01)
Only usable for characteristic use.
ESC 0x01
b) Stripe data section
PSCD (Protected stripe encoding data)
The actual image data encoded with JBIG image compression is included in PSCD by the section
remaining after the last 2 bytes from SDE, ESC and SDNORM or SDRST are omitted.
Image Data
The actual image data encoded with JBIG image compression.
STUFF
Image data is a variable, so STUFF:0 (zero) is adjusted by continuous sending so that the image
data can be arranged into byte units or word (2 byte) units.
SDNORM (Stripe data completion: 0x02)
Shows the completion of stripe data
ESC 0x02
SDRST (The reset at completion of stripe data: 0x03)
Shows the completion of stripe data. Everything including the study table and the ATMOVE are
reset.
ESC 0x03
When the image data encoding is 0xFF, it is imperative to attach 0x00 after the image
data encoding 0xFF in order to distinguish ESC(0xFF).