manualshive.com logo in svg

Canon MP730 - MultiPASS Color Inkjet, Quick Reference Manual

Share
Download
Canon MP730 - MultiPASS Color Inkjet Quick Reference Manual Download Page 83

10-18

Troubleshooting

Chapter 10

If the nozzle check pattern does not print properly

Refer to 

Maintaining the printhead

, p. 9-3.

Interpreting the messages

When the Alarm light blinks

Check the message in the LCD. If there is a message, follow the instructions and correct the 
error. Then to resume operation, press [Resume]. The Alarm light will turn off.
If the error remains, turn off the machine and disconnect the power cord. Wait 15 seconds, then 
reconnect the power cord and turn on the power. 

If you cannot clear a paper jam

Turn off the machine and disconnect the power cord. Wait five seconds, reconnect the power 
cord and turn on the power. If the problem has been resolved, the Alarm light will turn off.

If the Alarm light still lights even after you have turned the power on again

Contact the Canon Customer Care Center.

Error codes are printed in the ACTIVITY REPORT.

LCD messages

For detailed information on LCD messages and error codes, refer to the 

User’s Guide

.

If you cannot solve the problem

If you have a problem with your machine that you cannot solve with the information provided 
in this chapter, contact the Canon Customer Care Center.

CAUTION

• If the machine makes strange noises, emits smoke or strange smells, unplug it immediately and 

contact the Canon Customer Care Center. Do not attempt to disassemble or repair the machine 
yourself.

IMPORTANT

• Attempting to repair the machine yourself may void the limited warranty.

If you contact the Canon Customer Care Center, make sure you have the following information 
ready:
• Product name: MultiPASS MP730 or MultiPASS MP700
• Serial number (located on the label located at the back of the machine)
• Details of the problem
• Steps taken to try to resolve the problem and the results

Summary of Contents for MP730 - MultiPASS Color Inkjet













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands