Canon MP730 - MultiPASS Color Inkjet Quick Reference Manual Download Page 61

Page: 61 / 108

9-2

Maintenance

Chapter 9

Replacing an ink tank

This section describes how to replace an ink tank. Before replacing an ink tank, be sure to read
the section

When to replace an ink tank

(

p. 9-1).

CAUTION

• Do not replace ink tanks while the machine is printing or performing another operation.

Follow this procedure to replace an ink tank:

Make sure the power is turned on.

Press [Open]

and lift up the scanning unit

• The printhead holder automatically moves to the

center of the machine.

CAUTION

• Do not try to manually move or stop the

printhead holder.

• Do not touch any metal parts.

Press on the tab to release the empty ink
tank

, then remove it from its slot

CAUTION

• Do not remove the printhead from the machine.
• If several ink tanks need replacing, remove

and replace each one individually.

IMPORTANT

• Discard the empty ink tank immediately

according to local laws and regulations for
disposal of consumables.

• Handle ink tanks carefully to avoid staining

clothing or the surrounding area.

On the new ink tank, pull the orange tape in
the direction of the arrow and remove the
plastic wrapper so you can see the air hole

Turn the ink tank over so that the protective
cap

is facing up. Then hold the ink tank as

shown and remove the protective cap

• To avoid spilling ink, never press on the long sides

of the ink tank

• Once you remove the cap

, do not touch the ink

port

Insert the ink tank into the empty slot on
the printhead. Press down gently on the ink
tank until an audible click is heard.

• Make sure the ink tank is the correct color for the

slot.

Close the scanning unit until it locks into place.

PUSU

llow

Ink

I-3

PULL

BCI-3eY

Ink Tank

D C

Summary of Contents for MP730 - MultiPASS Color Inkjet













































































































Search results

Summary of Contents for MP730 - MultiPASS Color Inkjet

Reviews:

Brands by name

Popular brands

Canon MP730 - MultiPASS Color Inkjet, Quick Reference Manual

Search results

Summary of Contents for MP730 - MultiPASS Color Inkjet

Reviews:

Brands by name

Popular brands