Canon MP370, Service Manual

Page: 108 / 149

Chapter 5
5-7
"PUT IN CARTRIDGE"
Cause: The printhead is not set.
Solution: Set the printhead.
"WASTED INK NEAR FULL"
Cause: The waste ink tank (which holds the ink used for print head cleaning) is nearly full.
Solution: If "CHECK PRINTER" message is displayed, refer to Cause and Solution of the error code ##343 and
replace the waste ink tank.
"WRONG CARTRIDGE"
Cause: The printhead (BJ cartridge) is not installed correctly.
Solution: Install the prithead (BJ cartridge).
Cause: The printhead (BJ cartridge) is defective.
Solution: Replace the printhead (BJ cartridge).
"MEMORY FULL"
Cause: The fax's memory is full because it has received too many documents.
Solutions: (1) Print out any documents which are stored in memory. Then start the operation again.
(2) If the memory contains any facsimiles you don't need, delete them.
(3) You cannot receive a fax was scanned with fine graphic images.
Cause: The fax's memory is full because you tried to send too many pages at once.
Solution: Divide the document and send each part separately.
Cause: The macine's memory is full because you tried to copy too many pages at once or a very detailed document.
Solution: Divide the document and copy each part separately.
Cause: Tried to print a large image data in the photo print mode.
Solution: Print the image data from the computer.
"WAIT COOLING"
Cause: During printing, the printhead may have become too hot.
Solution: Allow the machine to cool down. The machine will resume printing when it has cooled down.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com