background image

6

MEdiA LOAn 

CAnOn REbEL xT

PROfiCiEnCy quESTiOnS

Written teSt:

Complete this written portion on a separate sheet of paper before arriving for your operational proficiency.

1. how do you set the shutter speed and where will you view the shutter speed settings?
2. how do you connect the camera to a power outlet?
3. What creative zone settings should you use to set the aperture?
4. When setting the Mode dial to full auto, what three modes are set?
5. how do you shoot black & white?
6. When should you change the white balance settings; and with regards to this, what should you 

remember when returning the camera to Media Loan?

7. What should you do if the LCd panel does not display a clear image?
8. name three things that might permanently damage this camera.
9. if you check out a camera and it is lost, stolen or damaged, who is 100% responsible for the replacement 

costs of it?

operationaL profiCienCy: 

To be done during your scheduled proficiency.

a. remove the camera from the case and identify all controls and parts.
b. Correctly identify the Cf memory card.
d. Set camera on tripod correctly and use the camera to record a couple of still images.
e. playback the still images.
f. describe the use of the menu button.
g. Set camera to manual focusing.
h. demonstrate how to change the image size.
i. Set up a battery to be charged.
J. pack the camera back in its case.

Summary of Contents for Media Loan 360.867.6253







Reviews: