manualshive.com logo in svg

Canon MAXIFY GX6021, Online Manual

Share
Download
Canon MAXIFY GX6021 Online Manual Download Page 134

Moving parts

Keep body parts away from moving parts. Keep body parts out of the motion path.

• Ink bottles

Keep out of reach of children.
Do not drink ink.

If ink is accidentally licked or swallowed, rinse out your mouth or drink one or two glasses of
water and obtain medical advice immediately.
If ink gets into your eyes, flush them with water right away, and obtain medical advice
immediately.

If ink gets on your skin, wash the area with soap and water immediately. If irritation to your skin

persists, obtain medical advice immediately.

When you store ink bottles, close bottle caps completely and place bottles in standing position.

If the ink bottles are laid down, ink may leak.

When refilling ink tanks, take sufficient care to prevent ink from spattering onto surroundings.
Ink may stain clothes or other belongings permanently. Washing may not remove ink stains.
Do not leave ink bottles in areas exposed to high temperature, such as near fire or a heater or in

a car. Bottles may warp and cause ink leakage or ink may become poor quality.

Do not subject ink bottles to impacts. Ink bottles may be damaged or bottle caps may come off

by such impact, and ink may leak.

Do not transfer ink to other containers. This may result in accidental ingestion, inappropriate

use, or poor ink quality.

• Moving the printer

Hold the printer by its sides and carry it with both hands.

134

Summary of Contents for MAXIFY GX6021




















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands