Canon MARKLL WUX10 Command List Download Page 33

Page: 33 / 91

Projector WUX10 MarkII User Commands

- 29 -

Revision History / Date

Changes

Revised by

Approved by

DPON

Direct power-on setting

Format

DPON=<Direct power-on setting parameter:ID>
GET

□

DPON / ?

△

DPON

This sets direct power-on to ON.

OFF

This sets direct power-on to OFF.

Environment

Power

Input

OFF ON PM

D-RGB A-RGB1 A-RGB2 COMP

VIDEO

HDMI

None

X O X

Response

"i:OK" is returned if the parameter was set properly.
For '

GET DPON

' or '

?DPON

', current direct power-on setting is returned as

'g:DPON=<Direct power-on setting parameter:ID>'

For details on other responses, refer to the "Error List".

Description

(1) This command is used to set direct power-on function to ON or OFF.
(2) This command functions in the same way as when "System setting" - "Direct power-on" are

selected on the menu.

(3) Direct power-on cannot be set to ON when "OFF" has been selected as the power management

setting (

PMM=OFF

("e:1004 POWER_MANAGEMENT_OFF" is returned.)

(4) The current direct power-on setting can be obtained using the GET command. ("

GET DPON

Example

Setting

> DPON=ON

Direct power-on is set to ON.

< i:OK

Reference

> GET DPON on ?DPON

The current direct power-on setting is obtained.

< g:DPON=ON

* Commands are indicated by ">", and responses are indicated by "<".

Summary of Contents for MARKLL WUX10




























































































Search results

Summary of Contents for MARKLL WUX10

Reviews:

Related manuals for MARKLL WUX10

Brands by name

Popular brands

Canon MARKLL WUX10, Command List

Search results

Summary of Contents for MARKLL WUX10

Reviews:

Related manuals for MARKLL WUX10

Brands by name

Popular brands