Canon MARKLL WUX10 Command List Download Page 30

Page: 30 / 91

Projector WUX10 MarkII User Commands

- 26 -

Revision History / Date

Changes

Revised by

Approved by

CONT

Contrast setting

Format

CONT=<Contrast setting:Number>
GET

□

CONT / ?

△

CONT

Setting values for <Contrast setting:Number> are -20 to 20.

Environment

Power

Input

OFF ON PM

D-RGB A-RGB1 A-RGB2 COMP

VIDEO

HDMI

None

X O X

Response

"i:OK" is returned if the parameter was set properly.
For 'GET CONT' or '?CONT', current contrast setting is returned as

g:CONT=<Contrast setting:Number>

For details on other responses, refer to the "Error List".

Description

(1) This sets the screen contrast.
(2) This command functions in the same way as when "Image adjustment" - "Contrast setting"

are selected on the menu.

(3)  If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(4)  This sets the currently selected input signal and image mode.
(5)  The current contrast can be acquired using the applicable GET command. ("

GET CONT

Example

Setting

> CONT=3

This sets the contrast to +3.

< i:OK

Reference

> GET CONT or ?CONT

This retrieves the contrast.

< g:CONT=3

* Commands are indicated by ">", and responses are indicated by "<".

Summary of Contents for MARKLL WUX10




























































































Search results

Summary of Contents for MARKLL WUX10

Reviews:

Related manuals for MARKLL WUX10

Brands by name

Popular brands

Canon MARKLL WUX10, Command List

Search results

Summary of Contents for MARKLL WUX10

Reviews:

Related manuals for MARKLL WUX10

Brands by name

Popular brands