Canon MARKLL WUX10 Command List Download Page 28

Page: 28 / 91

Projector WUX10 MarkII User Commands

- 24 -

Revision History / Date

Changes

Revised by

Approved by

BVOL

BEEP sound setting

Format

BVOL=<Beep sound setting:Number>
GET

□

BVOL / ?

△

BVOL

BEEP sound mute

BEEP sound output

Environment

Power

Input

OFF ON PM

D-RGB A-RGB1 A-RGB2 COMP

VIDEO

HDMI

None

X O X

Response

"i:OK" is returned if the parameter was set properly.
For '

GET BVOL

' or '

?BVOL

', current BEEP sound setting is returned as

g:BVOL=<Beep sound setting:Number>

For details on other responses, refer to the "Error List".

Description

(1) This sets the BEEP sound output.
(2) This command functions in the same way as when "System setting" - "Electronic sound" are

selected on the menu.

(3) The beep sound can be set even while the sound is muted, but it will not sound even if (beep

sound output) has been set.

(4) The current beep sound output status can be acquired using the applicable GET command.

GET BVOL

Example

Setting

> BVOL=0

This mutes the BEEP sound.

< i:OK

Reference

> GET BVOL or ?BVOL

This retrieves the BEEP sound output state.

< g:BVOL=1

* Commands are indicated by ">", and responses are indicated by "<".

Summary of Contents for MARKLL WUX10




























































































Search results

Summary of Contents for MARKLL WUX10

Reviews:

Related manuals for MARKLL WUX10

Brands by name

Popular brands

Canon MARKLL WUX10, Command List

Search results

Summary of Contents for MARKLL WUX10

Reviews:

Related manuals for MARKLL WUX10

Brands by name

Popular brands