31
Connection
Connection
When connecting a signal source to the projector, be sure to:
• Turn all equipment off before making any connections.
• Use the correct signal cables for each source.
• Ensure the cables are firmly inserted.
• In the connections above, some cables may not be included with the projector (see
). They are commercially available from electronics stores.
• The connection illustrations are for reference only. The rear connecting jacks available on the
projector vary with each projector model.
• Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + function key with a monitor symbol turns the external display
on/off. Press FN and the labeled function key simultaneously. Refer to your notebook's
documentation to find your notebook's key combination.
• If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the video source device is turned on and operating
correctly. Also check that the signal cables have been connected correctly.
4 4
6
6
5
5
3
3
1
6
2
Notebook or
desktop
computer
A/V device
RS-232C cable
USB cable
LAN cable
HDMI cable
Computer cable
(supplied)
Audio cable
1
2
3
4
5
6
Monitor
Speakers
Notebook or
desktop computer
Router
HDBaseT
matrix