background image

B-DPPJ15-016-0.FM

Video Products Technical Bulletin 30-2015-044

Page 1 of 10

Data Projector

DATE: March 30, 2015

DESCRIPTION
This bulletin provides instructions on how to install and remove 

the optional lens. The instructions are attached from pages 2–10.

CAUTION: 

Installation and removal of the optical lens must be 

performed ONLY by service personnel properly trained and 

thoroughly knowledgeable on safe handling of laser-emitting 

equipment.

NOTE: 

• The instructions are extracted from the following service 

manual:

VPL-FHZ700L, VPL-F725HZL, VPL-F720HZL Service 

Manual, 1

st

 Edition (Revised 1), Section 1-7, “Installation/

Removal of Optional Lens.”

• The instructions are not included in the operation manual.
• Only the following optical lenses with laser certification can 

be installed:

VPLL-FM22
VPLL-ZM42
ZPLL-ZM102
VPLL-Z4007
VPLL-Z4008
VPLL-Z4011
VPLL-Z4015
VPLL-Z4019
VPLL-Z4025
VPLL-Z4045

Video Products

Technical Bulletin 30-2015-044

SUBJECT: HOW TO INSTALL AND REMOVE OPTIONAL 

LENS

DPPJ15-016

MODEL:

VPL-F720HZL

VPL-F725HZL

VPL-FHZ700L

SERIAL NO: ALL

Italicized information in green applies to 
customers outside the United States.

Summary of Contents for VPL-F720HZL











Reviews: