Canon LV-S3E/D78-5423, Service Manual, Page: 5 / 106

3. Tools & Test Equipment
The following tools and equipment are required to perform disassembly, reassembly
and adjustment.
1) Special Tools
None
2) General Purpose Tools (Commercially available, but can be purchased with
the following numbers.)
3) Test Equipment
4) Other Equipment
5) Chart/Software
II
Description Tool No. Specification Remarks
Ball Driver CY9-5002-000 2.0mm Optical Parts Removal
& Adjustment
Hex Key Set CY9-5007-000 2.0mm Optical Parts Removal
& Adjustment
Driver, adjustment CY9-5003-000 1.8mm Electrical Adjustments
Driver, Slot CY9-5004-000 4.0mm Optical Parts Adjustment
Driver, Cross-point CY9-5005-000 No.2 Assembly & Disassembly
Description Tool No. Specification Remarks
Digital Multi-meter Commercially DC1mmV~500V Electrical Adjustment
available
Video Signal Generator
Commercially Color Bars and Gray
Electrical Adjustment
available Scale
Computer Signal Commercially Gray Scale
Electrical Adjustment
Generator available (or personal computer)
Oscilloscope
Commercially 100MHz response or Waveform Checks and
available over Electrical Adjustment
Description Tool No. Specification Remarks
Screen
Commercially Over 40"
All Adjustment
available
Personal Computer
Commercially
Windows 95 OS All Adjustment
available
Description Tool No. Specification Remarks
Monitor Tester Supplied with manual All Adjustment
Gray Scale Chart Supplied with manual Bitmap Data All Adjustment
Common Center
Supplied with manual
(SVGA) Common Center
Adjustment Chart Adjustment
Color Shading
Supplied with manual Ver. 3.02
White Uniformity
Correction Tool Adjustment