Canon LV-S3E/D78-5423, Service Manual

Page: 44 / 106

Part 3: Adjustment
3-2
1.2 Service Adjustment Menu Operation
[To enter the service mode]
To enter the “Service Mode”, press and hold the MENU and INPUT button on the
projector at the same time for more than 3 seconds, or press and hold the MENU button
on the remote control unit for more than 20 seconds. The service menu appears on the
screen as follows.
[To adjust service data]
Select the adjustment item no. by pressing the pointer UP or DOWN button, and
change the data value by pressing the VOLUME – or button. Refer to the
“Service Adjustment Data Table” for further description of adjustment item no. and data
value.
[To exit the service mode]
To exit the service mode, press the POWER button on the projector or the remote
control unit.
Fig. 3-1
Computer
70
100
35
Service Mode
TempA TempB TempC
Fan1Speed Fan2Speed Fan3Speed
32.10 43.21 45.67
97 105 79
Data value
Input Mode
Input Mode
Version No.
Note :
This part of display
is available at the
service mode
No.60 - 83.
- VOL +
SET MENU INPUT POWER
REPLACE
WARNING
LAMP
Point Button
Top Control
Set Button