Canon LV-S3E/D78-5423, Service Manual

Page: 34 / 106

3.11 FN902, FN905 and Sensor Board Removal
1. Remove 1 screw A (T3x8) to take the Duct under
the Panel.
2. Remove 1 screw B (T3x8) to take the Holder with
the Fans (FN902 and FN905) off.
3. Remove 2 screws C (T3x10) to take the Fans
(FN902 and FN905) off.
4. Remove 1 screw D (T3x8) to take the Sensor
Board off.
3.12 FN901 and Lamp Cover SW Removal
1. Remove 1 screws A (M4x4 + washer) to take the
shield plate off.
2. Remove 2 screws B (T3x8) to take the Fan
(FN901) and the duct off.
3. Remove 2 screws C (T3x8) to take the SW Board
and the spring off.
Part 2: Repair Information
2-10
A
B
C
C
D
FN902
FN905
Sensor
Board
FN901
Spring
Duct
B
B
C
C
Earth Plate
SW Board
A
Shield Plate
Spacer
Spacer sheet
Fig. 2-15
Fig. 2-16