LV-7575 Expand Serial Command Functional Specifications
11/71
5
．
Functional Execution Command Table
5.1
Image Command Table
Execute command
Item
CF_BRIGHT_%1 [CR]
Set value of Brightness
CF_CONT_%1 [CR]
Set value of Contrast
CF_COLOR_%1 [CR]
Set value of Color
CF_TINT_%1 [CR]
Set value of Tint
CF_SHARP_%1 [CR]
Set value of Sharpness
CF_GAMMA_%1 [CR]
Set value of Gamma
CF_WBAL-R_%1 [CR]
Set Red value of White Balance
CF_WBAL-G_%1 [CR]
Set Green value of White Balance
CF_WBAL-B_%1 [CR]
Set Blue value of White Balance
CF_COLTEMP_%1 [CR]
Set level of Color Temprature
CF_NZRED_%1 [CR]
Set ON/OFF of Noise reduction
CF_PROGV_%1 [CR]
Set mode of Progressive scan
CF_IMAGE_%1 [CR]
Set Image mode
CF_IMAGEADJ_%1 [CR]
Set Store/Reset of values in Image Adjustment
CF_APCTRL_%1 [CR]
Set level of Auto Picture Control
CF_COLMNSAV_%1 [CR]
Set area to store current values of Color Management
CF_COLMNLD_%1 [CR]
Set area to load values of Color Management
5.2
PC Adjust Control Command Table
Execute command
Item
CF_FSYNC_%1 [CR]
Set value of Fine Sync
CF_TDOTS_%1 [CR]
Set value of Total Dots
CF_CLPPHASE_%1 [CR]
Set value of Clamp Phase
CF_CLPWIDTH_%1 [CR]
Set value of Clamp Width
CF_H-POS_%1 [CR]
Set value of Horizontal Position
CF_V-POS_%1 [CR]
Set value of Vertical Position
CF_DDOTS_%1 [CR]
Set value of Display Dots
CF_DLINE_%1 [CR]
Set value of Display Line
CF_SETPCADJ_%1 [CR]
Apply values set in PC Adjust menu to screen image
CF_ORGMODE_%1 [CR]
Specify the original signal for PC mode
CF_PCSTORE_%1 [CR]
Store current setting values in PC Adjust menu to
Mode %1
CF_PCMODEFREE_%1 [CR]
Delete the values registered in Mode %1 and return it to
Free status.
5.3
Input Control Command Table
Execute command
Item
CF_INPUT_%1 [CR]
Select Input
CF_SOURCE_%1 [CR]
Select Source of selected Input
CF_INPUT1_%1 [CR]
Select Input1 and also set input source to %1
CF_INPUT2_%1 [CR]
Select Input2 and also set input source to %1
CF_INPUT3_%1 [CR]
Select Input3 and also set input source to %1
CF_INPUT4_%1 [CR]
Select Input4 and also set input source to %1
CF_SYSTEM_%1 [CR]
Select System of curretnlty selected Input
