[B-signal center adjustment]
8. Connect the digital voltmeter to test point "TP25B1" (+) and chassis ground (-).
9. Select item no. "2" of group no. "3" and change data value to adjust it so that the
voltage value is 7.30 ± 0.05 V.
2.7 Black Level Adjustment
1. Receive the 16-step gray scale computer signal.
2. Set to
COMPUTER
mode.
3. Enter the service mode.
[R-black level adjustment]
4. Connect an oscilloscope to test point "TP25R1" (+) and chassis ground (-).
5. Select item no. "3" of group no. "3" and change data value to adjust it so that
waveform "a" is 10.0 ± 0.1 V.
[G-black level adjustment]
6. Connect an oscilloscope to test point "TP25G1" (+) and chassis ground (-).
7. Select item no. "4" of group no. "3" and change data value to adjust it so that
waveform "a" is 10.0 ± 0.1 V.
[B-black level adjustment]
8. Connect an oscilloscope to test point "TP25B1" (+) and chassis ground (-).
9. Select item no. "5" of group no. "3" and change data value to adjust it so that
waveform "a" is 10.0 ± 0.1 V.
2.8 PC Offset Adjustment
1. Receive the 16-step gray scale computer signal.
2. Set to
COMPUTER
mode.
3. Enter the service mode.
[R offset adjustment]
4. Connect an oscilloscope to test point "TP25R1" (+) and chassis ground (-).
5. Select item no. "11" of group no. "3" and change data value to adjust it so that
waveform "a" (black signal part) has the maximum amplitude.
Part 3: Adjustment
3-12
(a)
black level
black level
Fig. 3-4
Summary of Contents for LV-7355J
