3. MECHANICAL DISASSEMBLIES
Mechanical disassemble should be made following procedures in numerical order.
Following steps show the basic procedures, therefore unnecessary step may be
ignored.
3.1 Cabinet Top, FN901 Removal
1. Remove 4 screws
A
(M3
×
8),
B
(M3
×
6) and pull the
Cabinet Top upward off.
2. Disconnect terminal “K6J” on the Main Board and
then pull the fan duct ass’y upward off.
3. Remove 2 screws
C
(T3
×
6) and remove fan “FN901”.
Part 2: Repair Information
2-5
The parts and screws should be placed exactly the same position as the
original otherwise it may cause loss of performance and product safety.
CAUTION
Fig. 2-5
Cabinet Top
A
B
B
A
C
FN901
C
Screws Expression
(Type Diameter
×
Length) mm
T type
M Type
Summary of Contents for LV-7215U
