Part 3: Adjustment
3-2
1.2 Service Adjustment Menu Operation
[To enter the service mode]
To enter the “Service Mode”, press and hold the
MENU
and
INPUT buttons
on the
projector at the same time for more than 3 seconds. The service menu appears on the
screen as follows.
[To adjust service data]
Select the adjustment group no. by pressing the
MENU (+)
or
KEYSTONE (–) button
,
and select the adjustment item no. by pressing the pointer
UP
or
DOWN button
, and
change the data value by pressing the
VOLUME –
or
button
. Refer to the
“Service Adjustment Data Table” for further description of adjustment group no., item
no. and data value.
[To exit the service mode]
To exit the service mode, press the
POWER ON-OFF button
on the projector or remote
control unit.
Fig. 3-1
Service Mode
Input
Video
Group
No.
Data
0
0
32
Ver. 1
.00
Item No.
Group No.
Data value
INPUT
WARNING
LAMP REPLACE
MENU
POWER
KEY
STONE
SET
VOL
VOL
+
-
Summary of Contents for LV-7215U
