Canon Legria HFM31, Instruction Manual

Page: 173 / 203

Additional Information
Š 173
Buffer overflow. Recording was stopped.
- The data transfer rate was too high for the memory card in use and the recording was
stopped. Replace the memory card with one rated Speed Class 2, 4, 6 or 10.
a
Built-in memory error
- The built-in memory could not be read. Contact a Canon Service Center.
a
Built-in memory is full
- The built-in memory is full (“
f
End” appears on the screen). Delete some recordings
(
0
53, 99) to free some space. Save your recordings (
0
124) and initialize the built-in
memory (
0
37).
a
Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
a
Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(
0
33).
- There was an error creating the file name. Set
8
8
[Photo Numbering] to [Reset] and
initialize the memory card or delete all the photos (
0
99) and all the scenes in the [For Web
Upload] and [For DVD Burning] index screens (
0
53).
a
Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card (
0
53, 99) or reduce the number of
scenes to copy.
- The memory card already contains the maximum number of scenes (3,999 scenes). Delete
some scenes (
0
53) to free some space.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder’s internal scene management data log
is full. Save your recordings (
0
122) and initialize the memory (
0
37). Write back the
backup files and try dividing the scene again.
Cannot edit
- Could not move a scene in the playlist. Delete some scenes from the playlist (
0
92).
Cannot enter standby mode now
- The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge
or replace the battery pack (
0
19).