Canon LEGRIA HF M506, Instruction Manual

Page: 161 / 235

Wi-Fi Functions
Š 161
4 Touch the [Encryption Key] control button to enter the encryption
key or password of the wireless access point and then touch [OK].
• If the encryption method of the wireless access point is set to WEP,
the WEP index key will appear on the screen. Select the same index
key of the access point.
5 Touch [Automatic] to automatically obtain an IP address.
• To assign the IP address manually, touch [Manual] and perform the
procedure in To manually assign an IP address (
A
159).
• A screen to test the settings will appear.
6 Select whether to test the settings.
• You can touch [Check Current Configuration] to review the network
settings.
• If you touched [Yes], a test of the settings will be performed and a
confirmation screen will appear. Touch [OK].
7 Save the settings of the connection point.
* After touching [OK], you can review the network settings. Touch [Wi-Fi Setup]
>
[Check Current Configuration]
>
Desired connection point
>
[
Î
] or [
Í
]
>
[
K
] three times when finished.
To manually enter a wireless access point (step 3)
Enter the details of the wireless access point.
* If you select [Open], you can select [No Encryption] or [WEP]. If you select,
[Open]
>
[WEP] or [Shared Key WEP], you will need to specify the WEP index
key.
[Yes]
>
[OK]*
>
[
X
]
Enter the access point’s SSID
>
[OK]
>
[OK]
>
Enter
the authentication/encryption method* and, if applicable,
the encryption key of the access point
>
[OK]
>
Continue to step 5
COP
Y