Canon LEGRIA HF M306, Instruction Manual

Page: 170 / 199

170 Š
Additional Information
b
Built-in memory is full
- The built-in memory is full (“
f
End” appears on the screen). Delete some recordings
(
0
52, 97) to free some space. Save your recordings (
0
122) and initialize the built-in
memory (
0
36).
b
Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
b
Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(
0
33).
- There was an error creating the file name. Set
8
8
[Photo Numbering] to [Reset] and
initialize the memory card or delete all the photos (
0
97) and all the scenes in the [For Web
Upload] and [For DVD Burning] index screens (
0
52).
b
Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card (
0
52, 97) or reduce the number of
scenes to copy.
- The memory card already contains the maximum number of scenes (3,999 scenes). Delete
some scenes (
0
52) to free some space.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder’s internal scene management data log
is full. Save your recordings (
0
120) and initialize the memory card (
0
36). Write back the
previously saved video file to the memory card when it is connected to the computer and try
again to divide the scene on the memory card.
- Use the supplied software PIXELA ImageMixer 3 SE to save the scene and divide it on the
computer.
Cannot edit
- Could not move a scene in the playlist. Delete some scenes from the playlist (
0
90).
Cannot enter standby mode now
- The camcorder cannot enter standby mode if the remaining battery charge is too low. Charge
or replace the battery pack (
0
19).
Cannot play back
- There is a problem with the memory. If this message appears often without apparent reason,
contact a Canon Service Center.
Downloaded From VideoCamera-Manual.com Manuals