Canon LBP6310dn Manual Download Page 262

Page: 262 / 452

Time Zone

The standard time zones of the world are expressed globally in terms of the difference in hours (± up to 12 hours) from
GMT

(± 0 hours). A time zone is a region throughout which this time difference is the same.

The time at the Greenwich Observatory in England is called GMT (Greenwich Mean Time).

Daylight Saving Time

In some countries and regions, time is advanced throughout the summer season.

Proceed to Step

if you do not specify the settings for the other options.

Multicast Discovery Settings

If you want to set the printer so that it responds to searches that use the multicast discovery
function

1. Set [Response] to [On].

2. In [Scope Name], enter the scope name to be used when searching for certain devices from utility software, such as

NetSpot Device Installer, by multicast.

If you want to set the printer so that it does not respond to searches that use the multicast
discovery function

Set [Response] to [Off].

Proceed to Step

if you do not specify the settings for the other options.

Click [OK].

㻞㻢㻞㻌㻛㻌㻠㻡㻞

Summary of Contents for LBP6310dn





































































































































































































































































































































































































































































Search results

Summary of Contents for LBP6310dn

Reviews:

Related manuals for LBP6310dn

Brands by name

Popular brands

Canon LBP6310dn, Manual

Search results

Summary of Contents for LBP6310dn

Reviews:

Related manuals for LBP6310dn

Brands by name

Popular brands