manualshive.com logo in svg

Canon LBP3300 Series, Service Manual

Share
Download
Canon LBP3300 Series Service Manual Download Page 58

Chapter 4

4-1

4.1 Periodically Replaced Parts

4.1.1 Periodically Replaced Parts

0011-2517

The machine does not have parts that require periodical replacement.

4.2 Consumables

4.2.1 Life Expectancy of Consumable Parts

0011-2518

No consumable parts are required in this printer.

4.3 Periodical Service

4.3.1 Periodic Service

0011-2519

No periodic services are required to this printer.

4.4 Cleaning

4.4.1 Cleaning During Service Visit

0011-2520

F-4-1

1. Separation pad

Wipe the rubber part with the dry lint-free paper.

2. Pick up roller

Wipe with the dry lint-free paper.

3. Feed roller

Wipe with the dry lint-free paper.

4. Transfer charging roller

The transfer charging roller is not to be touched or cleaned. If cleaning is unavoidable, do not touch the roller and do not contaminate the roller with solvent or oil.

Clean with dry lint free paper. Do not use water or solvent. Make

5. Fixing inlet guide

Wipe with the dry lint-free paper.

[5]

[4]

[3]  [2]

[1]

Summary of Contents for LBP3300 Series


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands