Canon LBP3300 Series, Service Manual

Page: 47 / 97

Chapter 3
3-2
3.1.4.2 Detaching the upper cover unit
0011-2787
1) Detach the control panel [1]
- 2 claws [2]
- A connector [3]
F-3-9
F-3-10
When detaching the control panel, be sure not to lift it up too much after re-
leasing the claws as a connector is connected to the panel.
2) Detach the upper cover [1].
- 4 screws [2]
F-3-11
F-3-12
3.1.5 Front Cover
3.1.5.1 Preparation for removing the front cover unit
0011-2793
1) Detach the left cover.
(page 3-1)
Reference[Detaching the left cover]
2) Detach the right cover. (page 3-1) Reference[Detaching the right cover]
3.1.5.2 Removing the front cover unit
0011-2794
1) Remove the cartridge arm [1].
- A screw [2]
F-3-13
2) Move the arm [1] to release from the boss [2].
F-3-14
3) Remove the front cover unit [1].
- 2 claws [2]
F-3-15
3.1.6 Main Drive Unit
3.1.6.1 Preparation for removing the main drive
assembly
0011-5166
1) Detach the left cover. (page 3-1) Reference[Detaching the left cover]
2) Detach the right cover. (page 3-1) Reference[Detaching the right cover]
3.1.6.2 Removing the main drive assembly
0011-5167
1) Remove the fan unit [1].
- A piece of wire [2]
- 2 screws [3]
F-3-16
2) Disconnect four connectors [1] to release from harness guide.