Canon LBP3300 Series, Service Manual

Page: 55 / 97

Chapter 3
3-10
F-3-68
5) Remove the spring [1].
6) Remove the fixing film.
- 4 Bosses [3] (2 each at right and left)
- 2 pressure plates [4] (Right and left)
F-3-69
3.5.3 Fixing Pressure Roller
3.5.3.1 Preparation for removing the fixing pressure
roller
0011-4966
1) Detach the left cover.
(page 3-1)
Reference[Detaching the left cover]
2) Detach the right cover. (page 3-1) Reference[Detaching the right cover]
3) Detach the rear cover. (page 3-1) Reference[Removing the rear cover
unit.]
4) Detach the upper cover.
(page 3-2)
Reference[Detaching the upper cover
unit]
5) Remove the video controller PCB. (page 3-5) Reference[Removing the
video controller PCB]
6) Remove the USB PCB.
(page 3-5)
Reference[Removing the USB PCB]
7) Remove the fixing assembly. (page 3-8) Reference[Removing the fixing
assembly]
8) Remove the fixing film. (page 3-9) Reference[Removing the fixing film]
3.5.3.2 Removing the fixing pressure roller
0011-4967
1) Slide out the fixing inlet guide (lower) [1] in the direction of arrow.
- A screw [2]
F-3-70
2) Turn the shaft support [1] in the direction of arrow to remove.
- A claw [2]
3) Remove the pressure roller [3].
F-3-71