manualshive.com logo in svg

Canon LBP251, User Manual

Share
Download
Canon LBP251 User Manual Download Page 415

Printing Reports and Lists

0W20-06E

You can check the condition of consumables and the machine settings by printing reports and lists.

Consumables Status Report

You can check the consumables status.  Consumables Status Report(P. 410)

User Data List/System Manager Data List

You can check the list of the settings (  Setting Menu List(P. 287) ) as well as the content that has been

registered in the machine.  User Data List/System Manager Data List(P. 411)

Department ID Management Report

You can check the total volume of printouts for each <Department ID>.  Department ID Management

Report(P. 412)

IPSec Policy List

You can check the list of policy names and the content of the IPSec settings that are registered in the machine.

IPSec Policy List(P. 413)

PCL Font List

You can check the list of available fonts for the machine.  PCL Font List(P. 414)

PS Font List

You can check the fonts available in PS mode.  PS Font List (LBP252dw)(P. 415)

Maintenance

409

Summary of Contents for LBP251
















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands