manualshive.com logo in svg

Canon LBP251, User Manual

Share
Download
Canon LBP251 User Manual Download Page 365

Could not connect. Check the PSK settings.

The network key (PSK) of a wireless router to be connected is not set to the machine correctly.

●

Check the network key (PSK) of the wireless router, and set it to the machine again.

Checking the SSID and Network Key(P. 150)
Setting Up Connection by Selecting a Wireless Router(P. 143)
Setting Up Connection by Specifying Detailed Settings(P. 146)

●

If  the  problem  persists  even  after  checking  the  network  key,  check  whether  the  machine  is  properly
installed and ready to connect to the network.

Installation/Settings Problems(P. 369)

Could not connect. Max connections to access point reached

You tried to connect to a wireless LAN router to which the maximum possible number of devices are

already connected.

●

Decrease  the  number  of  devices  connected  to  the  wireless  LAN  router  (the  number  of  clients).  For  the
maximum number of devices that can be connected to a wireless LAN
router, see the instruction manual for the router or contact the manufacturer of the router.

Could not detect any connections from wireless devices.

It was not possible to detect any mobile device within the predetermined length of time.

●

Connect again paying attention to the time limit.

Make Direct Connection (Access Point Mode)(P. 125)

Could not perform cleaning.

Paper jammed during cleaning.

●

Remove the jammed paper, set paper correctly, and perform cleaning again.

Clearing Jams(P. 350)
Fixing Unit(P. 394)

The amount remaining in toner cartridge required for cleaning the fixing unit is insufficient.

●

Cleaning  requires  sufficient  toner  cartridge  remaining.  Replace  the  toner  cartridge,  and  perform  the
cleaning again.

Replacing Toner Cartridges(P. 396)

Could not perform Open System auth. Check WEP settings.

The authentication method of the machine is set to <Open System>, but that of a wireless router is set to

"Shared Key."

Troubleshooting

359

Summary of Contents for LBP251
















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands